Isle CellFill Specifications

             PART 1 - GENERAL            

1.1

SCOPE: Provide lightweight cellular concrete (LCC) grout, complete.

1.2

QUALITY ASSURANCE:

A.

Use only experienced applicator, licensed or approved by the LCC manufacturer.

B.

Use mixing and pumping equipment approved by the LCC manufacturer.

1.3

SUBMITTALS: Submit the following items in accordance with SUBMITTALS section.

A.

Manufacturer’s product data, including test results for compressive strength and oven-dry density.

B.

Written proof of manufacturer’s approval of applicator.

1.4

DELIVERY:

A.

Deliver LCC grout premixed in ready-mix truck. The manufacturer will add the foam to the mixer at the jobsite or at the plant.

B.

Schedule delivery to prevent delay of placing LCC after all ingredients are mixed. Maximum lapse time; 90 minutes. No retempering allowed, except under the direction of the manufacturer’s representative.

           PART 2 - PRODUCTS           

A.

Isle CellFill, a lightweight cellular concrete grout composed of cement, clean salt free sand, foaming agent, clean water and fiber reinforcement providing the following minimum requirements:

1)

2)

           PART 3 - EXECUTION          

A.

Install LCC Grout in strict accordance with manufacturer’s instructions.

B.

Place as continuously as possible until installation is complete.

C.

Place no slurry against LCC grout that has attained its initial set, except at required and properly designed joints.

CURING: Air cure in accordance with manufacturer’s instructions.

CLEANUP: After completion of work, clean excess materials from walls and all surfaces so defaced. Remove all excess materials and scrap from the job and leave all surfaces neat and clean.